FCG not a plug-in

[jwh23362]

The "built in FCG", not a "plug-in" Craig, in the office theme has three boxes of which the first two are equal in width but which the last box is short in width. The first two boxes are about 3.1" wide and the last box is 3.0" wide. When new posts are added the short box causes text or a portion of the graphic to be cut off. How may I increase the width of the right box in the "built in FCG" to equal the two left boxes?

I suppose my inexperience and your condescension will find some common ground in the future.

Again,

Thank you for your effort.

[adew]

Hi,

Are you talking about the carousel of three images at the top of the home page? Can you post a link to your site so I can see what you mean? Thanks.

[jwh23362]

Yes, I am talking about the carousel. The box width for the 3rd and 6th image is less than the box width for the 1st & 4th and the 2nd & 5th image.

http://kingsgate.cc/

Thank you.
Thank you.

[jwh23362]

I needed to put site back in maintenance mode.
The total slide box width is 940 px
each slide width is 310 px
slide box 1 shows as 310 px
slide box 2 shows as 310 px
slide box 3 shows as 300 px
I would like all boxes to show as equal.

You can view any office theme and see the issue.

Thank you.

[adew]

Hi,

I looked at your site earlier today and noticed that your three images were not the same size (image three was 320px wide, for example). Try making all the images the same size and see if that cures it.